RX75 Plus INSTALLED RADAR & LASER DEFENSE SYSTEM by BELTRONICS RX75 Plus Corvette C-6 Install
Locate a switched fuse and tap into the hot leg. Ground for power can also be found on the Bose amplifier case. Pull the carpet back to expose
The Remote Mute Button (Code letter H on the installation manual) should be located within easy reach of the driver. NOTE: This button has three func
Front Laser Shifters: The Front Laser Shifters (Code letter B on the installation manual) can be mounted different ways. They can be mounted inside t
Take a small sharpened 1/8 inch metal rod and poke three holes through the rubber boot. Cut the phone jack connectors off the wires and run thru the h
Interface: Ensure all jacks are plugged into the interface. Use cable ties on the mute switch and amplified speaker jacks. Place wiring into the cav
White Orange Blue No wire Step 4: Place modular plug with cable into location as shown. Squeeze handles together until they stop. Step 1: Cut modular
Kommentare zu diesen Handbüchern